International Journal of Science , Engineering and Management (IJSEM)

Monthly Journal for Science , Engineering and Management

Volume3,February 2018,

Topic : Effect of Pattern Materials on Marginal Gap of Cast Copings Fabricated on Titanium Implant Abutment: An In-Vitro Study

Authors:Rajat R Khajuria || Rishav Singh, Sidhant Sudan

Abstract:Introduction: Margin placement is an essential requirement in any fixed restoration as it limits the boundary of the restoration and seals the implant abutment junction for entry of any debris or saliva, thus failing the restoration.2 The marginal fit of the cast restorations is essential for proper functioning, esthetics and success in the oral cavity. The aim of the study is to compare the effect of pattern materials on the marginal gap of cast copings fabricated on titanium implant abutment. Null hypothesis state no difference in pattern materials when tested for marginal fit over implant abutment. Materials& method: Two pattern materials: Inlay wax and Margin wax were used in the present study. And patterns were prepared on titanium Implant model with implants placed at premolar region and at the molar position. Two grooves one at 900 and other at 1800 were made and 20 samples of inlay wax patterns and 20 samples of margin wax patterns were made which were further divided into two subgroups of 10 each of premolar region and molar region respectively Two stage burnout was carried out and casting was done using nickel-chromium alloy. Two points marked at 900 and 1800 were checked at margin level with the help of stereomicroscope and the vertical marginal gap was evaluated. The marginal gap was calculated at 2 points i.e. 900 and 1800. The distance of the line from groove to the outermost margin was calculated at the master die and on all the samples and their differences were recorded. Results: The data collected from all the samples were analyzed using ANOVA and post hoc tests. In intergroup comparison between both the groups, Group 1 recorded more marginal gap (25.40 ± 0.52 μm) than group 2 (19.99 ± 0.39 μm). In intragroup comparisons between the subgroups, group B (24.13 ± 0.17 μm) recorded more marginal gaps than group A (21.26 ± 0.41 μm). The f value for all the subgroups was calculated as 87.2899 which was significant at p<0.05. Conclusion: Among the materials tested, patterns made of Margin wax proved to have more marginal fit than Patterns made of inlay wax..

Keywords: Inlay, Margin, Post, Stereoscope, Distortion.

Download Paper


DOI: 01.1617/vol5/iss2/pid12345


Related Articles

Comparative study of relationship between income inequality and economic growth in China with India.

Authors: Liu Li || Charuk Singhapreecha, Jirakom Sirisrisakulchai

Doi : 01.1617/vol4/iss12/pid30476

Volume2 ,December 2018.

Impact of Total Organic Carbon on Trihalomethane Formation in Treated Water of Saidabad Water Treatment Plant and along the Distribution System

Authors: Nusrat Sharmin || Mushfiqur Rahman Khan

Doi : 01.1617/vol4/iss12/pid06473

Volume2 ,December 2018.


Editor-in-Chief

Editor Image


Dr.Muhammad Ishtiaq,
Mirpur University of
Science & Technology,
Mirpur, Azad Kasmir.

View more


IMPACT FACTOR: 2.7

ISSN(Online): 2456-1304

Google Scholar Profile

Thomson Reuters ID : q-6288-2016.
ORCiD Research ID : 0000-0001-9540-6799

All Issues


DOWNLOADS

Copy-right Form Paper Template

ACCEPTANCE RATIO

ACCEPTANCE RATIO: 25%
ARTICLES PUBLISHED:00007
PAPER RECEIVED:000028
Journal Code : IJSEM
Electronic ISSN : 2456-1304
Impact Factor : 2.7
Frequency : Monthly
Contact : editor@ijsem.org

IFERP Other Journals


Subscribe

           Email:

Social Media