Open Access Journal

ISSN : 2456-1304 (Online)

International Journal of Engineering Research in Electronics and Communication Engineering(IJERECE)

Monthly Journal for Electronics and Communication Engineering

Open Access Journal

International Journal of Science Engineering and Management (IJSEM)

Monthly Journal for Science Engineering and Management
Call For Paper : Vol 11, Issue 08, August 2024

ISSN : 2456-1304 (Online)

Call for Paper

Vol 11, Issue 08, August 2024

Indexing

Partially Stabilised Zirconium Nano Coating Piston and Head Surface Used Experimental Investigation on Ethanol Blend with Peg (7.5) Direct Injection in High Compression Ignition Engine

Author : M. Velliangiri 1 M. Karthikeyan 2 G.Sureshkannan 3 K.Karthik 4

PDF

Date of Publication :13th June 2016

Abstract: This research article focused on partially stabilised zirconium nano-surface coating for piston head and cylinder head surface to perform the experimental investigation on direct-ethanol blend with 7.5 percent by mass of polyethene glycol (PEG7.5) fuel injection in the high compression ignition (EDICI) engine. NOx and soot emissions should be minimised while still increasing fuel economy. EDICI also removes NOx and soot, resulting in a low equivalence ratio and low flame temperatures. For starters, reaction rates are related to temperature and equivalence ratio. Injection, evaporation, and mixing processes are also involved in combustion. The pollution rating of the engine is used to investigate the engine's effect on emissions. The primary goal of this research article is to improve the engine's thermal efficiency. Just one-third of the energy in the fuel is converted into proper operation. This investigation was carried out in order to carry out this mission. As opposed to the uncoated engine, the coated engine's BTE (BTB) improves. Thermal conductivity is poor in the ceramic coating. Productivity increased as a result of the reduction in a wall surface. The variance of BTE is determined by thermal conductivity. BTE is 6.1 percent for 8YSZ + Al2O3 + TiO2

Reference :

    1. Cerita, M., Coban, M., Temperature and Thermal Stress Analyses of a Ceramic-Coated Aluminum Alloy Piston Used in a Diesel Engine, International Journal of Thermal Sciences, 77 (2014), Mar., pp. 11-18
    2.  Taymaz, I., The Effect of Thermal Barrier Coatings on Diesel Engine Performance, Surface and Coatings Technology, 201 (2007), 9-11, pp. 5249-5252
    3. Sonoya., et al., Assessment of the Properties of Sprayed Coatings for the Thermal Barrier Applied to the Piston of Internal-Combustion Engine, Mechanical Engineering Journal, 2 (2015), 1, 14-00380
    4. Mendera, K. Z., Effectiveness of Plasma Sprayed Coatings for Engine Combustion Chamber, SAE technical paper 2000-01-2982, 2000
    5.  Ramu, P., Saravanan, C. G., Investigation of Combustion and Emission Characteristics of a Diesel Engine with Oxygenated Fuels and Thermal Barrier Coating, Energy & Fuels, 23 (2009), pp. 653-656
    6.  Chan, S. H., Khor, K. A., The Effect of Thermal Barrier Coated Piston Crown on Engine Characteristics, Journal of Materials Engineering and Performance, 9 (2000), 1, pp. 103-109
    7. Saad, D., et al., Thermal Barrier Coatings for High Output Turbocharged Diesel Engine, SAE paper 2007-01- 1442, 2007
    8. Miller, R. A., Progress Toward Life Modeling of Thermal Barrier Coatings for Aircraft Gas Turbine Engines, Journal of Engineering for Gas Turbines and Power, 109 (1987), 4, pp. 448-451
    9. Rahmani, Kh., Nategh, S., Influence of Aluminide Diffusion Coating on Low Cycle Fatigue Properties of Rene 80, Materials Science and Engineering, A486 (2008), 1-2, pp. 686-695
    10.  Gan, J., Ann., Berndt, C. C., Nanocomposite Coatings: Thermal Spray Processing, Microstructure and Performance, International Materials Reviews, 60 (2015), 4, p. 195-244

Recent Article